Description

Assassin – Anodised Titanium

The Assassin Stem was designed by Joe King and is very much a multi functional stem. Likely the most multi functional stem there currently is.

Anodising has been done in house at HTV.

Features

• 14mm connection: With the included O-ring positioned in the middle slot you can achieve an airtight connection to any 14mm female connection.
• 10mm connection: With the O-ring positioned in the slot at the mouthpiece end you can connect to a 10mm connection. Holding the assassin in place while in use is required for this type of connection.
• Closing off airport function: By sliding the condenser O-ring up past the airport you can render the airport redundant. This is very useful if using your assassin with a bubbler.

Items you will need to complete your vapcap

To complete this setup you will also need the following items.

• The Cap Any Dynavap Cap can be used

Included

• 1 x Assassin Stem (Titanium)
• 1 x Titanium Tip
• 1 x Titanium Standard Condenser
• 2 x Spare O-rings
• 1 x Sticker
• 1 x Storage Tube